Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket CAN bus immobiliser. It's discrete, doesn't employ key fobs or LED indicators and is concealed in the wiring of the vehicle.
It also allows users to disable the system temporarily through Transport Mode to use it when they are renting out their vehicle. This guide will guide you through the steps of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle from hacking, key cloning, and relay attacks. The system is directly connected to the ECU of your vehicle and protected by a pin code that you choose. It is inaccessible to thieves using diagnostic scanners or other advanced methods. It is not able to be disabled using circuit cuts.
The system is easy to use, but it's important to have professional installation to ensure a secure and secure connection with your vehicle's ECU. An approved installer from Thatcham can assist in the installation and programming of your Ghost system. They can also suggest a tracking system or alarm to complete your vehicle's protection package.
The first step is to disconnect your battery to prevent the possibility of airbag deployment and short circuits. After the battery has been disconnected, the installer can safely begin working. Basic hand tools are helpful for securing connections with precision and a multimeter may be used to check electrical values and ensure safety. Cable tie and insulation tape are essential to protect connections and keep wiring tidy. The Ghost Immobiliser user's manual will provide specific guidelines specifically tailored to your specific model.
During the installation, it is crucial to select a grounding point that's free of paint and debris. The installer must be sure that the immobiliser's H and CAN L wires are connected to the appropriate ports on the vehicle's ECU. Based on the model, these wires might need to be soldered or plugged in. car stolen with ghost immobiliser -quality connector is recommended to ensure a sturdy and reliable connection.
Transport Mode can be activated by the customer after the installation is complete. This allows mechanics or valet parking to use the vehicle, without having to know the pin code. To do this, the customer must hit the button for service on the dashboard 5 times in a matter of 2 seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA verified and Thatcham approved. It's a great choice for those who rent their vehicles often on platforms like Turo. An immobiliser can lower insurance costs since it greatly reduces the chance of theft.
Getting Started
If you're seeking a solution to secure your vehicle from thieves You can't go wrong with an autowatch ghost immobiliser. It protects your vehicle from being started when a criminal steals or copies the key. This is due to its high-tech technology that is designed to prevent the engine from running until the correct PIN code is entered.
The device is connected to the vehicle's bus network CAN and allows direct communication with the ECU. It uses the buttons on your dashboard and steering to create a unique sequence, which only you are aware of. This makes it impossible for anyone else to start your vehicle. This is the most secure security system that will safeguard your pride and joy and will ensure its value should you decide to sell it in the future.
Installing a ghost immobiliser is a simple process, but it is crucial to follow the instructions carefully to avoid problems with the electrical system and malfunctions. You must first find a 12V power source and a suitable grounding for the chassis of your car. After that, you are able to begin to connect the wires to the immobiliser. Be sure to use high-quality connectors and soldering techniques to ensure a secure connection. Also, make sure to insulate the connections by using heat shrink tubing or insulation tape to protect them from electrical short circuits and other issues.
Once the wires are connected, you can connect the battery and start the engine to determine whether the immobiliser works. Once you have verified that everything is working properly and you are satisfied, you can place the immobiliser in a safe place inside the vehicle. Make sure to cover it well so that thieves can't tamper with it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it's a top-quality deterrent to car thieves. It provides superior protection against key cloning, hacking and relay attacks, and it cannot be disabled without knowing the code. The device is easy to use and can be set into the service valet setting to ensure that your vehicle will not be activated if you take it for an MOT or servicing.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to stop theft of vehicles. It connects directly to your vehicle's CAN bus and communicates with the ECU and ECU, making it a virtually undetectable addition to your vehicle. The Ghost Immobiliser will not interfere with the factory settings of your vehicle, unlike other aftermarket systems which require the removal of circuit elements.
The system is also unnoticeable by thieves using scanners for diagnostics. This is due to the fact that it does not transmit and receive radio frequency signals and it uses the CAN data to communicate with your ECU. It doesn't even require any modifications to your existing key fobs.
Enter your disarm sequence (either two or one button) and turn on the ignition of your vehicle to activate the Ghost Immobiliser. The indicator will flash twice to verify that you have entered the correct code. You can now start your vehicle and drive safely.
Once installed Once installed, the Ghost Immobiliser will safeguard your vehicle from hacking and key cloning, while protecting the value of your most prized possession. In Transport Mode you can temporarily disable the Ghost Immobiliser in case you need to give your vehicle to service or valet park.
To complete a Ghost Immobiliser installation, you'll need to identify a source of constant power (12V) and a grounding point. Be sure that both are well-insulated and can be touched. Cable ties are also suggested to secure the wires. This will reduce the risk of theft by potential thieves. To avoid mistakes, make sure to double-check these points and mark them using labels or tape. Check all connections for signs that they're getting worn out. Connectors that are loose could cause problems with the system, so be certain that they are securely fixed and well-insulated. Don't forget to test your Ghost Immobiliser after installation has been completed. This will confirm that the unit functions properly and that all connections and insulation are secure. If you encounter any issues, make sure to address them immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that integrates seamlessly with your vehicle's ECU to stop unauthorized motor starting. Its cutting-edge technology safeguards your car against key cloning, hacking, and other common tactics that thieves employ to steal vehicles. The Ghost is also able to work in conjunction with other alarm and tracking systems to give the ultimate vehicle protection. The Ghost's unparalleled features and discreet design make it a preferred choice for car enthusiasts and security-conscious drivers too.
To ensure proper integration of the Ghost Immobiliser, it's important to follow every step of the installation procedure. Consult the wiring diagram for the vehicle as it will assist you in locating and connecting the wires. You'll then need to identify the power and grounding sources. Once you've identified these, you'll need to mark them so that they're easy to identify when installing. Finally, it's vital to use only the best tools and materials. Basic hand tools can help to make precise connections while a multimeter can confirm electrical values and guarantee safety. Insulation tape and cable ties will keep the connections tidy and neat. A Ghost-specific user manual is also available.
It is crucial to test the system prior installing it. Enter the PIN code into the system, and then start the vehicle. This will ensure that the immobiliser works as intended and will stop vehicle starts that are not authorized. It is recommended to complete this step regularly as part of your routine vehicle inspections to ensure that the system is operating correctly.
After the installation is completed, you can begin driving your car with confidence. The Ghost will guard your vehicle from potential car thieves. It will ensure that no one can take your car away if they do not have the correct PIN code. The Ghost can also be used with a tracker that is approved by Thatcham to detect any attempts at tampering or theft that could lead to the location of your vehicle in the event of it being stolen.
The Ghost can be utilized on a variety of vehicles and is compatible with the majority of major brands. If you're looking to secure your vehicle with this cutting-edge device, call Monty's Locksmith today to learn more about our installation and service options. We are a TASSA Installer who is registered This certification ensures that we adhere to the strictest guidelines and procedures when installing our products. This reassures customers, insurers and law enforcement agencies that all installations are performed safely and correctly.